How To Prevent Hardwood Floors From Fading
You spend a ton of money getting your floor looking exactly the way you want it to and then – horror of horrors – you notice it’s already beginning to fade!
Harsh UV light can cause your hardwood floor and its surrounding furniture to fade in colour.
There’s no need to worry because in this article you will learn how to prevent your hardwood floors from suffering the same fading fate.
Add Window Films
Did you know the glass you have in your windows right now blocks up to 25% of the sun’s harmful rays?
This is a very good thing as hardwood tends to be very sensitive to light and will fade – although not always to lighter shades but darker ones too!
By adding a protective film that sticks to the inside of your home’s windows, you can drastically increase this blocking ability by up to 99.9 per cent!
As an added bonus, they also block infrared rays that may damage your wood flooring.
These cutting-edge window films help regulate your home’s temperature too, aiding you in reducing your heating bills by an incredible 60%!
Not only will these window films save you from needing to treat your wood flooring so often but they will also pay for themselves within a period of two years or less!
The bonuses don’t end there either.
Window films are ultra-clear, which means they’re virtually invisible to the human eye, and they help reduce the glare you often see on your devices’ shiny screens.
You can purchase window films from any local supermarket but you won’t get the full range of protection and benefits they offer unless you buy them from a licensed professional.
Tint Your Windows
Tinted windows can provide an extra layer of protection for your fading floorboards that window films can’t.
But wait, aren’t window films and tinted windows the same thing?
The terms are often used interchangeable, but no, they’re not the same.
So, what exactly is the difference between tinting your windows and having window films?
The answer lies in the fact tinted windows not only stop damaging rays of sunlight from passing through your windows but also change the way your windows look.
Some tinted windows make your glass appear a shade darker while others are mirrored on one side.
Most of the time, companies prefer tinted windows and homeowners prefer window films.
However, if privacy is important to you, you may opt for window tinting instead.
Where window films reduce the sun’s glare, tinting can remove it entirely.
Choose Lighter Tones
If window tinting and window films aren’t of interest to you, then the solution could lie in the type of wood you select for your flooring.
Both light- and dark-toned wood flooring are more noticeable when the sun fades them, so choosing paler-coloured wood drastically reduces the impact of fading.
Good examples of this include birch, ash, maple, white oak and red oak.
It’s not only the colour of the wood you can select, but the finish you apply to it that can make a real difference.
Maintaining the wood’s original natural hue and avoiding stains will ensure fading has a minimal effect.
Another option is to ride on the coattails of modern home improvement trends and add a light grey wash to your floorboards.
Not only do these types of finishes not darken your floorboards as many stains would, but the wash helps protect against harmful UV sunlight too.
Refinish Or Replace Damaged Spots
Sometimes you might find yourself in the unfortunate position of having to deal with fading wood flooring after it’s already taken happened.
If you find yourself in this situation, don’t fret, as there are many ways to fix it.
If the fading effect of your wood is only minor in degree, it can be fixed with a process known as screening.
The way it works is to remove the polyurethane layer without damaging the wood underneath — the way sanding does.
You can hire professionals to do this for you and it’s a great deal cheaper than having the whole floor replaced!
For wood flooring that has experienced greater damage, it may need sanding.
This process requires specialist equipment — especially protective items such as a dust mask, gloves, goggles, and ear protection.
You want to move the sanding machine slowly with the direction of the grain.
After the initial sanding process, you’ll have to go over the area again with less abrasive sandpaper.
Finally, you’ll polish the wood with a very fine level of sandpaper.
Once you’re done, make sure to hoover up the wood dust particles before buffing the newly-sanded wood flooring.
Now, you must apply the wash or stain.
Please take care as these chemicals can make you very ill, so ensure to do this in a well-ventilated area.
Let the stain or wash dry overnight.
TIP: Ensure to check the stain’s instructions on how many layers you need to add and how long it will take to dry.
It must be completely dry before anyone is allowed to walk on it!
A less labour intensive, but in some ways more extreme method, is to replace the
If there are only a few boards, you may be able to replace them yourself.
If you’re not experienced, or otherwise nervous about doing the work yourself, simply hire a professional to do it for you to avoid any problems you might cause later down the line.
Clean Your Floors With Natural Products
Supermarket shelves are rammed with harsh chemicals that experts claim are the best way to keep your wood flooring in tiptop condition.
But beware: these gurus are often only trying to extricate money from your pocket.
Most real flooring experts suggest using natural cleaning solutions.
Not only are they less aggressive than their manmade counterparts but they’re less likely to harm us too.
They also won’t strip away our floor’s colour — causing the fading we began this whole cleaning process to avoid in the first place!
A much-touted cleaning formula is white vinegar and water.
We can assure you it works.
This simple concoction will clean your floors without draining it of its colour.
So, there you have it.
Avoid harsh man-made cleaning chemicals, and use film or tinted windows to remove the worst of the sunlight.